measuring instruments logo

Hotline

Fluke 710 mA Loop Valve Tester Calibrator

description:The Fluke 710 Valve Testing Loop Calibrator is designed to enable users to perform quick, easy tests on HART smart control valves....
BASIC INFO
We promise 100% original brand new with 1-year warranty.
If you are interested in our products, please feel free to contact us!
-----------------------------------------------------------
HONGKONG XIEYUAN TECH CO., LIMITED
Add: 7-A16,Caishen Commercial Plaza,Hankou Railway Station,Wuhan, China
Contact: Ms. Lily
Email: lily@hkxytech.com
WhatsApp/Skype: +86 13789949182

 
 
 
 
Fluke-710-Loop Valve Tester
 
 
Product overview: 710 mA Loop Valve Tester
 
Smart Control Valve Testing is now easier than ever
 
 
The Fluke 710 Valve Testing Loop Calibrator is designed to enable users to perform quick, easy tests on HART smart control valves. Featuring built-in test procedures and an intuitive user interface, the 710 allows users to quickly and easily perform valve tests, while the valve test quick-check results provide at-a-glance diagnostics help you make maintenance decisions faster than ever. The valve health quick-check results let you know whether your valve is in good, marginal or in bad operating condition so you can quickly decide whether additional maintenance is necessary.
 
 
 
Valve testing and HART communication in a precision loop calibrator
 
 
 
With the 710 Valve Testing Loop Calibrator’s built in HART communication function, users can source a 4-20 mA signal to cause the smart control valve to move, while simultaneously interpreting the valve’s HART feedback signal to determine whether the valve is moving to the expected position. In addition to positional information, the measured pressure delivered from the valve’s internal I/P (which moves the valve) can be determined through the HART communication protocol.
 
 
 
The 710 has built-in test procedures that automatically increase and change the mA signal while monitoring the HART position and pressure feedback from the control valve, giving you a better overall picture of valve health at the simple push of a button.
 
 
 
Pre-configured valve tests, at-a-glance answers
 
 
 
Valve test routines built into the 710 include:
 
 
Manual testing; manually change the mA signal and view the HART position and pressure variable information
 
Full range ramping of the mA signal from 4 to 20 to 4 mA while recording the 0-100-0% position, or the pressures applied that move the valve from 0-100-0%
 
Stepping the mA signal on the input to the valve in steps and evaluating the valves response to the mA input changes
 
Speed tests to determine how fast the valve can open or close
 
Bump and partial stroke tests that help test valves over a portion of their range so they can be tested in a live process
 
 
 
ValveTrack™ Software enables further analysis and trending
 
Valve tests that are logged and recorded to memory in the 710 are available to upload to included ValveTrack™ analysis software.
 
 
 
ValveTrack™ software enables you to:
 
 
 
Upload, print and plot logged valve tests taken in the field
 
Compare previous uploaded tests to recent tests
 
View valve test history by HART Tag ID
 
Export valve test data to CSV for additional analysis in Microsoft Excel®
 
Saving time, getting answers
 
 
 
 
In addition, the 710 offers:
 
 
 
Logging of HART data in the field. Once recorded by the 710 in the field, the ValveTrack™ software can upload the HART configuration of up to (20) HART devices in your plant and output data in either (.csv) or (.txt) format.
 
Data logged mA loop measurements and HART data can be recorded from a particular transmitter for troubleshooting and loop tuning. The data log feature offers selectable capture with recording intervals of 1 to 60 seconds and a logging capacity of 4910 records or 99 individual sessions. Each record contains the mA measurement and all four process variables.
 
 
 
Product Highlights
 
 
Valve test procedures that deliver Good, Marginal or Bad assessment of a control valve
 
Generic HART communication
 
Best-in-class mA accuracy at 0.01 % measurement or source value
 
Compact rugged design
 
Intuitive user interface with Quick-Set knob for fast setup, easy to use
 
24 V DC loop power with mA measure mode (-25 % to 125 %)
 
Resolution of 1 μA on mA ranges and 1 mV on voltages ranges
 
Built in selectable 250 Ω resistor for HART communications
 
Simple two wire connection for all measurements
 
Auto shutdown to conserve battery life
 
Variable step and ramp time in seconds
 
 
 
HART communication
 
The Fluke 710 offers a built-in HART modem to communicate the following HART commands:
 
 
 
Read sensor PV information
 
Read PV output information
 
Read and write PV unit type, tag ID name, descriptor, and message
 
Read and write PV ranges (upper and lower)
 
Enter/exit fixed current mode
 
Set zero offset
 
Trim DAC zero (mA output 4 mA)
 
Trim DAC gain (mA output 20 mA)
 
 
 
HART Commands for Valves
 
 
The 710 includes these unique HART commands to support control valves:
 
Autotrim of valve controller
 
 
 
In addition, the Fluke 710 offers:
 
 
 
Logging of HART data in the field. Once recorded by the 710 in the field, the ValveTrack™ software can upload the HART configuration of up to 20 HART devices in your plant and output data in either .csv or .txt format
 
Data-logged mA loop measurements and HART data can be recorded from a particular transmitter for troubleshooting and loop tuning. The data log feature offers selectable capture with recording intervals of 1 to 6 seconds and a logging capacity of 4910 records or 99 individual sessions. Each record contains the mA measurement and all four process variables.
 
 
 
 
Key features
 
 
 
Key valve testing functions include pre-configured valve signature test, speed test, step test, manual test, and bump/partial stroke test
 
Key mA loop calibrator functions include mA source, mA simulate, mA read, mA read/loop power, and volts read
 
ValveTrack™ Software enables upload to a PC for further in-depth analysis of valve measurements that are logged and recorded to memory
 
 
 
Detailed Specifications
 
Functions mA source, mA simulate, mA read, mA read/loop power, and volts read.
Ranges mA (0 to 24 mA) and Volts (0 to 30 V DC)
Resolution 1 µA on mA ranges and 1 mV on voltage range
Accuracy 0.01% ± 2 counts, all ranges (@ 23 °C ± 5 °C [73.4 °F ± 41 °F])
Operating temperature range -10°C to 55°C (14°F to 131°F)
Humidity range 10 to 95% non-condensing
Stability 20 ppm of F.S. /°C from -10°C to 18°C and 28°C to 55°C
Display 128 x 64 pixels, LCD Graphic w/backlight, .34 high digits
Power 6 AAA alkaline
Battery life 40 hours continuous use (measure mode using)
Loop compliance voltage 24 V DC @ 20mA
Over-voltage protection 240 V AC
Overload current protection 28 mA DC
EMC EN61326 Annex A (Portable Instruments)
Dimensions (L x W x D) 15 x 9 x 3 cm (6 x 3.6 x 1.3 in)
Weight 0.3 kg (9.5 oz)
Included accessories Traceable calibration certificate with data, batteries, test leads, USB upload cable and safety
Warranty Three year
 
 
 
Fluke-710 mA Loop Valve TesterValve Testing Loop Calibrator with HART Includes:
 
 
Stackable test lead set
 
Extended tooth alligator clip set
 
TP220 test probes
 
AC280 SureGrip™ hook clips
 
Lemo to USB upload/download cable
 
ValveTrack™ software (free download)
 
Softcase
 
Six AAA batteries (installed)
 
709/709H/710 Product manual CD-ROM
 
709/709H/710 Quick reference guide
 
709/709H/710 Safety information
 
 
 
Fluke Calibration tools
 
 
 
Fluke 789 ProcessMeter
 
Fluke 710 mA Loop Valve Tester
 
Fluke 773 Milliamp Process Clamp Meter
 
Fluke 787B ProcessMeter
 
Fluke 709H mA loop calibrator 
 
Fluke 773 Milliamp Process Clamp Meter
 
Fluke 709 mA loop calibrator
 
Fluke 772 milliamp process clamp meter 
 
Fluke 771 milliamp clamp meter 
 
Fluke 715 Volt/ mA Calibrator
 
Fluke 707Ex is an intrinsically safe loop calibrator
 
Fluke 705 loop calibrator
 
Fluke 754 Documenting Process Calibrator-HART
 
Fluke 726 Precision Multifunction Process Calibrator
 
Fluke 725Ex Series Process Calibrator
 
Fluke 753 Documenting Process Calibrator
 
Fluke 719 Pressure Calibrator
 
Fluke 719Pro Electric Pressure Calibrator
 
Fluke 707 Current Loop Calibrator with Quick Click Knob
 
Fluke 725 Multifunction Process Calibrator
 
Fluke 750P Series Pressure Modules
 
Fluke 154 HART Communicator
 
Fluke 729 Automatic Pressure Calibrator
 
Fluke 721 Pressure Calibration Instruments
 
Fluke 700G Pressure Gauge Calibrator
 
Fluke 718 Pressure Calibrator
 
Fluke 718Ex Intrinsically Safe Pressure Calibrator
 
Fluke 719 Pressure Calibrator
 
Fluke 750P Series Pressure Modules
 
Fluke 717 Pressure Calibrator
 

Pre:Fluke 789 ProcessMeter Ultimate Troubleshooting Tool 100% original brand new Next:Fluke 773 Milliamp Process Clamp Meter 100% original